Fire Damage Repair in Clovis, CA
The cleanup crew hauled out the debris and the smell is finally fading, but your house is still bare studs and subfloor. One free call to Unify Fire Solutions connects you with a licensed and insured independent contractor in Clovis who handles the rebuild: framing, wiring, drywall, roofing and the finish work that makes it feel like home again. The line is answered 24/7, and dispatch begins before you hang up.
- Rebuild contractors who work from your adjuster's scope
- A written, line-item estimate before any framing starts
- Crews that handle permit pulls and inspection visits
Getting your home back after the cleanup
Cleanup leaves the house safe and stripped. Repair is the slower phase that makes it livable again, and it depends on permits, inspections and an insurance scope that almost never catches everything the first time.
Licensed, Insured Independent Pros
Reconstruction is general contracting, and most jurisdictions require a licensed contractor to pull the building permit. Each contractor we refer is an independent business with its own license and insurance, and wiring and plumbing go to licensed trade subs. Ask to see the license and a certificate of insurance before you sign, then verify both.
Line-Item Quotes Up Front
A rebuild should never start on a verbal number. The contractor who walks your property writes a line-item estimate, usually in the same estimating format insurers use, so each line can be held up against the adjuster's scope. If a line is missing, such as drywall texture or an arc-fault breaker, it shows up in black and white.
Rapid Local Dispatch
Our dispatchers answer 24/7 and start matching you with a contractor near Clovis during the first call. A walkthrough often happens the same day or the next, depending on crew availability and distance. That gets your estimate in front of the adjuster sooner.
The Right Reconstruction Tools
A rebuild crew brings a very different kit from a cleanup crew. Expect moisture meters to confirm framing is dry before it gets closed in, framing nailers and joist hangers, laser levels for flattening a sistered floor, and a paint spectrophotometer for blending new walls into the rooms that survived.
Fire Damage Repair, from studs to paint
No two fire losses match, yet the rebuild nearly always runs in one sequence: structure first, then systems, then the shell, then finishes.
For most people the construction is not the hard part. Knowing what belongs on the list is. An adjuster writing a scope from the doorway can miss the joist that is charred on its top edge, the circuit that cooked inside a wall two rooms away, or the PEX line that sagged above the ceiling. A contractor who opens cavities and probes the wood finds those items before the drywall goes back up, not after.
These are the parts of a fire rebuild that contractors in our network around Clovis usually take on. Your job may need some of it or all of it, and the written estimate will spell out which.
Adjuster Scope Comparison
The adjuster's scope is the starting point, not the final word. The crew checks every line against the real damage and writes a supplement for whatever was left out.
- Line-by-line comparison with the scope of loss
- Photos and measurements behind each supplement
- Meeting the adjuster on site when needed
Joists, Studs and Framing
Charred lumber gets probed and measured, not guessed at. Joists with shallow char are often sistered with new lumber fastened alongside, while deep char or cracked members are cut out and replaced.
- Char depth checks with an awl or probe
- Sistering, new headers and top plates
- Engineer review for load-bearing changes
Electrical and Plumbing Work
Heat travels along a circuit well past the burn line. Insulation on cable can turn brittle or melt inside a wall, so licensed electricians usually replace circuits that ran through the hot zone. PVC softens at modest temperatures and PEX is not built for fire heat, so melted runs get replaced by licensed plumbers.
- New circuits, boxes and panel work
- Melted PEX, PVC and fittings replaced
- Pressure test before the walls close
Insulation, Barriers and Drywall
Once framing passes inspection, walls go back up in order: insulation, a vapor retarder where code calls for it, then drywall, tape, mud and texture.
- Batts, blown cellulose or foam to code
- Type X board on garage and rated walls
- Texture matched to surviving rooms
Roof Decking, Windows and Doors
When a fire breaks through the roof, it leaves burned rafters, delaminated decking and shingles that will not lie flat again. The contractor replaces decking, underlayment and roofing, then sets new windows and exterior doors where heat cracked glass or warped frames.
- Rafter repair and new roof decking
- Underlayment, flashing and roofing
- Replacement windows and entry doors
Cabinets, Floors and Paint
Finish work is the part you will live with every day. New cabinets, counters and flooring go in, paint is color-matched, and trim is milled or sourced to match the profiles in the rooms that made it through.
- Cabinet and countertop replacement
- Flooring matched or replaced room to room
- Paint, trim and hardware matching
About code upgrades: Pulling a repair permit often brings current-code requirements with it, like interconnected smoke and CO alarms or arc-fault breakers on living-area circuits. Many policies carry ordinance-or-law coverage that may help with the extra cost. Limits vary, so ask your adjuster what your policy says before the permit is pulled.
Ready to start the rebuild?
One call connects you with an independent reconstruction contractor near Clovis. The referral is free and the line never closes.
Call +1-833-336-1630Four steps from phone call to punch list
Fire rebuilds take weeks or months, so knowing the order of things up front saves a lot of stress.
- 1
Reach a Live Dispatcher
Let the dispatcher know how far cleanup has gotten, whether you have an adjuster's scope yet, and which rooms took the fire. The call is free, and the line is open 24/7.
- 2
Your Walkthrough Gets Scheduled
Dispatch matches a reconstruction contractor near Clovis, who sets a walkthrough time, frequently the same day or the next. Timing depends on crew availability and distance.
- 3
Assessment and Written Quote
The contractor probes framing, takes moisture readings, opens a few wall cavities to trace wiring, and photographs everything. A written, line-item estimate follows, and you review it with your adjuster before anyone picks up a hammer.
- 4
Work Done, Then a Walkthrough
Permits are pulled, rough-in inspections pass, and the house is closed in and finished. The job ends with a room-by-room walkthrough and a punch list, and the final sign-off waits until every line is cleared.
How the rebuild went for people who called
The insurance scope only listed drywall and paint over the stove. The contractor pulled the ceiling and found the joists above it charred halfway through. He sistered three of them, sent photos to the adjuster, and the supplement was approved the following week.
Our garage fire looked contained, but the electrician found melted cable jackets running into the laundry room wall. Those circuits got rerun, the garage got Type X board, and the inspector passed it on the first visit.
I own a duplex and had tenants waiting to move back in. The contractor handled the permit, kept me updated after each inspection, and worked through the punch list in two days. My tenants were home sooner than I expected.
My biggest worry was the hallway, where half the oak floor burned and the other half survived. New boards were laced into the old, the whole hall was refinished, and nobody can tell where the damage ended.
Fire rebuild questions we hear most
How long does it take to rebuild a house after a fire?
One burned room, such as a kitchen, is often finished within a few weeks of estimate approval. A loss that reaches the roof or several rooms often takes several months, because permits, inspections, engineering and material lead times stack up. Ask the contractor for a written schedule with the inspection points marked.
Do I need a building permit to repair fire damage?
In most places, yes, once the work goes beyond cosmetic repairs. Replacing framing, wiring, plumbing or roofing typically requires a permit and inspections at rough-in and final. The licensed contractor normally pulls it, and the inspector's sign-off protects you when you sell or refinance later.
Can charred joists be repaired, or do they have to be replaced?
It depends on how deep the char goes and whether the member still carries its load. Surface char is often sanded or scraped, sealed and left in place, and moderate char is commonly sistered with new lumber. Deep char, cracking or sagging generally means replacement, sometimes with an engineer's letter.
Does all the wiring have to be replaced after a house fire?
Not every wire, though anything that ran through the hot area needs inspection and is commonly replaced. Heat can damage the insulation on a cable inside a wall even where the drywall looks fine. A licensed electrician traces the runs, tests them, and the work is inspected before walls close.
What if the contractor's estimate is higher than the insurance adjuster's?
That is common, and it rarely means anyone is padding the numbers. The contractor submits a supplement listing what was missed, backed by photos and measurements, for the adjuster to review. Many differences come from hidden damage that was found once walls and ceilings were opened.
Who pays for code upgrades when rebuilding after a fire?
Many policies include ordinance-or-law coverage, which may pay some or all of the cost of bringing rebuilt areas up to current code. Coverage amounts differ from policy to policy, so check your declarations page or ask the adjuster early. Typical items are smoke and CO alarms, arc-fault breakers and updated stair or egress details.
Fire Damage Repair across Clovis and nearby areas
We take calls from every part of Clovis and the communities around it, from older homes with plaster and knob-and-tube surprises to newer builds with engineered joists and PEX manifolds. The dispatcher matches you with an independent contractor who already works in your area and knows the local permit office.
- Kitchen rebuilds
- Garage fires
- Roof and attic losses
- Rental units
- Condos and townhomes
- Small businesses
Zip codes we take calls from include 93611 93612 93619 93613 93747. If the cleanup is done and you are ready to get your home back, call now and a dispatcher will start the match. If the first contractor is not the right fit, call back and we will connect you with another one.
